Under $50

Light Up Wheels perfect for cruising at night outside or at the rink during any disco skate! 

Hardness: 85A
Diameter: 62mm

Fritzy's Tip: Make sure you buy bearings to go with these ones! These are sometimes hard to put on shorter axles. It is recommended you turn your axle nut around and screw it on backwards so that your wheel stays on!

Sold in packs of 4, order two if you want enough for both skates!

The Radar Energy 57 features the finest outdoor urethane available for outdoor skating. The wheel glides smoothly over rough surfaces and small debris. The Energy 57 are small for transitions and tricks. They also make perfect replacements for the cheap outdoor wheels that come on children’s skates. 

• COLOR: Aqua, Clear Blue, Pink, Purple, Red, Yellow

• SKATING STYLE: Outdoor, Trail Skating

• WHEEL CATEGORY: Outdoor Performance

• WHEEL HARDNESS: 78A

• WHEEL HUB TYPE: Micro

• WHEEL SIZE: 31 mm x 57 mm

• Sold in packs of four wheels

Fritzy's Tip: Do not forget to buy two 4 packs if you want wheels for both your skates. We sell wheels in 4 packs because a lot of time folks like to mix and match wheels and colors!

Bones® REDS® are manufactured in China to our Bones Skate Rated™ specifications in a manufacturing facility dedicated to producing the highest quality skate bearings. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry. Because they offer near Bones Swiss performance at a fraction of the cost, they have become the best selling bearings.

Features

• Single, non-contact, removable rubber shield for easy cleaning and less friction
• High speed Nylon™ ball retainer for greater strength and speed
• Pre-lubricated with Speed Cream™ racing lubricant
• Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible

Contents

• Set of 16 bearings
• Choice of 8mm (most common) or 7mm (European brands, and older models of artistic skates)
• Instructions
• Sticker

Wristsaver:

• Tough, 4-way stretch nylon mesh provides a snug fit
• High-density, impact-resistant molded ABS splints on front and back for support
• Shock absorbing EVA foam secured between support splints and wrist for cushioning

Knee/Elbowsaver:

• Lightweight, shock absorbing, ventilated EVA foam provides cool air flow and limits perspiration
• Ergonomically designed for comfort
• Wide, reinforced elastic straps ensure a secure fit

Kneesaver One Size Fits All 
Elbowsaver One Size Fits All 
Wristsaver To ensure the Wristsaver fits perfectly, measure hand circumference at the knuckles and match to the sizes listed below:

JR 6.0 – 7.0 in
S 7.0 – 8.0 in
M 8.0 – 9.0 in
L 9.0 – 10.0 in

Junior Saver Series 3 Pack - Link

Bearings:

RollerBones branded bearings. Internal geometries and clearances modified for skating. 

Features

Wristsaver:

• Tough, 4-way stretch nylon mesh provides a snug fit
• High-density, impact-resistant molded ABS splints on front and back for support
• Shock absorbing EVA foam secured between support splints and wrist for cushioning

Knee/Elbowsaver:

• Lightweight, shock absorbing, ventilated EVA foam provides cool air flow and limits perspiration
• Ergonomically designed for comfort
• Wide, reinforced elastic straps ensure a secure fit

Kneesaver One Size Fits All 
Elbowsaver One Size Fits All 
Wristsaver To ensure the Wristsaver fits perfectly, measure hand circumference at the knuckles and match to the sizes listed below:

JR 6.0 – 7.0 in
S 7.0 – 8.0 in
M 8.0 – 9.0 in
L 9.0 – 10.0 in

Junior Saver Series 3 Pack - Link

The Sonar Zen provides you good performance in the most affordable outdoor skate wheel. Set of 8

• COLOR: Black, Blue, Green, Magenta, Orange, Pink, Red, Yellow
• SKATING STYLE: Outdoor, Trail Skating
• WHEEL CATEGORY: Outdoor Recreation
• WHEEL HARDNESS: 85A
• WHEEL HUB TYPE: None
• WHEEL SIZE: 32 mm x 62 mm

Wristsaver:

• Tough, 4-way stretch nylon mesh provides a snug fit
• High-density, impact-resistant molded ABS splints on front and back for support
• Shock absorbing EVA foam secured between support splints and wrist for cushioning

Knee/Elbowsaver:

• Lightweight, shock absorbing, ventilated EVA foam provides cool air flow and limits perspiration
• Ergonomically designed for comfort
• Wide, reinforced elastic straps ensure a secure fit

Kneesaver One Size Fits All 
Elbowsaver One Size Fits All 
Wristsaver To ensure the Wristsaver fits perfectly, measure hand circumference at the knuckles and match to the sizes listed below:

JR 6.0 – 7.0 in
S 7.0 – 8.0 in
M 8.0 – 9.0 in
L 9.0 – 10.0 in

Junior Saver Series 3 Pack - Link

• Radar Engery 62 Features:

  • Category: Outdoor Performance
  • Skating Style: Outdoor Trail Skating
  • Size: 32 mm x 62 mm
  • Hardness: 78A
  • Hub: Micro
  • Urethane/Colors: Teal, White, Clear Yellow, Clear Green
  • Sold in packs of four wheels
  
  

Fritzy's Tip: Do not forget to buy two 4 packs if you want wheels for both your skates. We sell wheels in 4 packs because a lot of time folks like to mix and match wheels and colors!

The combined efforts of the popular Toe Caps and Toe Guards, the new Riedell Pro Fit Toe Caps are the perfect combination of toe and lace protection to keep your skates looking like new no matter what surface you skate on. The Pro Fit Toe Cap is crafted from top-quality hand sorted leather. The Pro Fit Toe Cap attaches at the toe stop, extends around the toe of the boot and finishes about half way up the laces. Laces are fed through the top of the Pro Fit Toe Cap to create a secure and ultra-protective fit.

The Pro Fit Toe Caps come in one standard size that fits all Riedell boots and are available in several color options. Sold in pairs.

Riedell Pro Fit Leather Toe Cap Features:

• Made from full-grain leather
• Available Leather Colors: Black, White, Red, Pink, Royal Blue, Ultra Blue, Baby Blue, Mango, Yellow, Orange, Emerald Green, Purple, Gray, and Turquoise
  • Click to see Pro Fit Toe Cap Leather Colors
• Covers entire toe and bottom half of laces for maximum scuff protection
• Fits all Riedell boot models
• Easy to install
• Sold in pairs

CIB Slide Blocks are made from high density plastic that slides with ease on coping and rails and also has a U-shaped depression to help balance those stalls and grinds. Easy to install without dismounting plates, these slide blocks are adaptable to many of the most popular plates in use today.

https://cibcrew.com/pages/hardware-compatibility

Included in Package:

• Slide Blocks (2)
• 10°/20° Adapters (2 each)
• Mounting Hardware
• T-Handle Allen Wrench
• Instructions

★ Protective Set

★ Custom-designed women's protective gear including knee, elbow, and wrist pads

★ Pastel Fade print is unique to each set

★ Lycra backing for comfort and breathability

★ Protective Set

★ Custom-designed women's protective gear including knee, elbow, and wrist pads

★ Pastel Fade print is unique to each set

★ Lycra backing for comfort and breathability

Light Up Wheels perfect for cruising at night at the rink during any disco skate! 

Hardness: 97, 100A
Diameter: 58mm
Packaged: Sold in 4 packs so buy two if you want enough for both skates!

Fritzy's Tip: Make sure you buy bearings to go with these ones! These are sometimes hard to put on shorter axles. It is recommended you turn your axle nut around and screw it on backwards so that your wheel stays on!

Sold in packs of 4, order two if you want enough for both skates!

Wristsaver:

• Tough, 4-way stretch nylon mesh provides a snug fit
• High-density, impact-resistant molded ABS splints on front and back for support
• Shock absorbing EVA foam secured between support splints and wrist for cushioning

Knee/Elbowsaver:

• Lightweight, shock absorbing, ventilated EVA foam provides cool air flow and limits perspiration
• Ergonomically designed for comfort
• Wide, reinforced elastic straps ensure a secure fit

Kneesaver One Size Fits All 
Elbowsaver One Size Fits All 
Wristsaver To ensure the Wristsaver fits perfectly, measure hand circumference at the knuckles and match to the sizes listed below:

JR 6.0 – 7.0 in

Fritzy's Fit Tip: ADULTS, DO NOT ORDER THIS, IT WILL NOT FIT YOU!!

• SKATING STYLE: Outdoor, Trail Skating
• WHEEL CATEGORY: Outdoor Performance
• WHEEL HARDNESS: 78A
• WHEEL HUB TYPE: Micro
• WHEEL SIZE: 35 mm x 65 mm

Fritzy's Tip: Do not forget to buy two 4 packs if you want wheels for both your skates. We sell wheels in 4 packs because a lot of time folks like to mix and match wheels and colors!

187's Derby Wrist is designed with skating in mind. Its exceptional features have been developed to keep the athlete well protected and less restricted. Experience the difference!

FEATURES
- Quick slide-on makes for easy fit
- Unrestricted finger motion allows normal hand action
- Cupped and contoured protective plate covers wider area of palm and wrist
- Expanded protective area disperses energy of hard impacts
- Conveniently located sweatband allows for quick wipe-off action
- Padded interior provides increased comfort
- Perforated materials improve breathability

★ Custom-designed women's protective gear

★ Protective pack including knee, elbow and wrist pads

★ Lycra backing for comfort and breathability

★ Available in an extended size range

★ Comes in a mesh carry bag for easy carrying and storage

Globally popular, the Fly Knee is our slimmest and most versatile knee pad. Use is primarily for skating with cross-over applications in other action sports. The Fly Knee is a proven option for safety and protection.

FEATURES
- Contoured form-fitting design cradles knee
- Superior foam system absorbs hard impacts
- Streamline shape and design increases mobility
- Seamless interior finish provides ultimate comfort
- Ballistic nylon with industrial-weight stitching ensures durability
- Size specific caps create close contact with pad to minimize bulk

Wristsaver:

• Tough, 4-way stretch nylon mesh provides a snug fit
• High-density, impact-resistant molded ABS splints on front and back for support
• Shock absorbing EVA foam secured between support splints and wrist for cushioning

Knee/Elbowsaver:

• Lightweight, shock absorbing, ventilated EVA foam provides cool air flow and limits perspiration
• Ergonomically designed for comfort
• Wide, reinforced elastic straps ensure a secure fit

Kneesaver One Size Fits All 
Elbowsaver One Size Fits All 
Wristsaver To ensure the Wristsaver fits perfectly, measure hand circumference at the knuckles and match to the sizes listed below:

JR 6.0 – 7.0 in
S 7.0 – 8.0 in
M 8.0 – 9.0 in
L 9.0 – 10.0 in

Junior Saver Series 3 Pack - Link

Introducing the Bont Glow roller skate wheel. A hybrid indoor/outdoor wheel that uses LED lights that illuminate the tire as you cruise around. No batteries are required as the magnetic floating spacer powers the wheel's core to light up when they spin. All you have to do is roll and your wheels light up as you skate with a bright luminous neon effect!

The Glow LED roller skate wheel has a hardness of 83A. A great hybrid indoor/ outdoor wheel that works well on the sidewalks or skating rinks. Perfect for an evening skate or show them off at the rink. The LED lights also serve as a safety feature when skating at night, illuminating your path of travel and announcing your position to oncoming traffic.

Specifications:

Colors: Cherry Blossom Pink, Tickle Blue, Pearl White, Misty Teal
Size: 62mm x 35mm
Hardness: 83a
Use: Recreational Skating
Surfaces: Hybrid Indoor/ Outdoor Wheel
Sold in 4 packs and need 8mm bearings
Bearings are not included

Fritzy's Tip: Make sure you buy bearings to go with these ones! These are sometimes hard to put on shorter axles. It is recommended you turn your axle nut around and screw it on backwards so that your wheel stays on!

Giddy up! these teenie weenie inbetweenies are small like a jam plug but thick like a toe stop. made of the same higher quality rubber as deadstop heartstoppers, you can wear these bbs at the skatepark, in the street, and on ramps. the gradual wear of heartstopper LiLs will be able to ease you in to the world of jam plugs or taking your toe stops out completely! 

* Short stem only!

Fritzy's Tip: We recommend using some lubricant before installation. Will not fit Impala or any other bolt on Toe Stops. Also will not fit Rainbow Riders!

* Disclaimer Final Sale

All items are final sale and are not eligible to be returned or exchanged. 

Propel back in time. The Chaya Airbrush is a playful colored skate developed with maximum comfort and tons of fun in mind! This fully vegan mid-cut boot benefits from a great fit and an EVA insole for ultimate comfort. Mounted to the light weight, glass-fiber reinforced Chaya Aja plate for strength and response, this is the easy and smooth ride you are looking for at the roller disco, on the street or beach. Gliding on Chaya Spectrum outdoor wheels (78a, 59mm) and Wicked ABEC 7 bearings, this is the ultimate package for all of your retro roller skating dreams.

WHEELS
Name	Chaya Spectrum
Width	38mm
Diameter	59mm
Hardness	78A
Compound	outdoor, cruising comfort
Bearing standard	608 standard
BEARINGS
Brand	WCD Wicked
Rating	ABEC 7
Standard	608 standard
Shield	ZZ
Material	c-steel
Lubrication	grease
GLOBAL
Division	cruising, dance & jam
Skill	beginner, advanced, pro
Speed	training
Weight	1210g (size 41)
Size attribute	single
Size run	36-42
Fitting (width / lenght)	normal / normal
Vegan	yes
PLATE
Axle type	standard with nut
Size run	M (36-38), L (39-41), XL (42-46)
Manufacturing process plate	injection molding
Cushion	casted polyurethane
Cushion hardness	92A
Cushion height	17mm barrel, 12mm cone
Material	glass-fiber reinforced plastic (GFRP) - GFK
Mounting Standard	standard mounting
Name	Chaya Aja
Power toe system (PTS)	yes
Truck hangar	glass-fiber reinforced plastic (GFRP) - GFK
Truck angle	10°
Adjustable side to side (DCM only)	no
Adjustable front to back (DCM only)	no
Width truck hangar	1,77" / 45mm
Width truck incl. axles	4,1" / 105mm
BOOT
Outsole	vintage
Outsole material	glass-fiber reinforced plastic (GFRP) - GFK
Ventilation	medium
Durability	medium
Height (cm)	23cm (size 41)
Innershoe	built in liner / textile
Innersole	thin EVA innersole
Mounting standard	standard mounting
Material upper	polyurethane-leather
Stiffness boot heel area	medium
Stiffness boot front area	medium
Type	mid cut
Closure	standard lacing
Heat molding	no
TOESTOPPER
Name	Classic
Off Set	yes
Toe stopper fixation	screwed in
Stem	no stem
Shape	flat
Material	NR/SBR = natural rubber / styrene-butadiene rubber

* Disclaimer Final Sale

All items are final sale and are not eligible to be returned or exchanged. 

Inspiration to get you rolling into your retro fantasies. The Chaya Voyager skate is a skate with rugged style and maximum comfort. This fully vegan deep yellow boot is made of PU-nubuk leather for full on outdoor vibes.

Mounted to the Chaya Galaxy aluminum plate for strength and response, this is the effortlessly smooth ride you need for the street or beach. Gliding on Chaya Propel outdoor wheels (78a, 61mm) and Wicked ABEC 9 bearings, this is the ultimate package for all of your retro roller skating dreams.

 

WHEELS
Name	Chaya Propel
Width	38mm
Diameter	61mm
Hardness	78A
Compound	outdoor, cruising comfort
Bearing standard	608 standard
BEARINGS
Brand	WCD Wicked
Rating	ABEC 9
Standard	608 standard
Shield	ZZ
Material	c-steel
Lubrication	grease
GLOBAL
Division	cruising, dance & jam
Skill	beginner, advanced, pro
Speed	training
Weight	1210g (size 41)
Size attribute	single
Size run	36-46
Fitting (width / lenght)	normal / normal
Vegan	yes
PLATE
Axle type	standard with nut
Size run	203mm (36-37), 228mm (38-39), 240mm (40-41), 253mm (42-43), 278mm (44-45), 291mm (46)
Manufacturing process plate	casted
Cushion	casted polyurethane
Cushion hardness	92A
Cushion height	19mm barrel, 11mm cone
Material	A356 aluminum
Mounting Standard	standard mounting
Name	Chaya Galaxy
Power toe system (PTS)	no
Truck hangar	AL casted
Truck angle	15°
Adjustable side to side (DCM only)	no
Adjustable front to back (DCM only)	no
Width truck hangar	1,77" / 45mm
Width truck incl. axles	4,1" / 105mm
BOOT
Outsole	vintage
Outsole material	glass-fiber reinforced plastic (GFRP) - GFK
Ventilation	medium
Durability	medium
Height (cm)	23cm (size 41)
Innershoe	built in liner / textile
Innersole	thin EVA innersole
Mounting standard	standard mounting
Material upper	polyurethane-nubuk leather
Stiffness boot heel area	medium
Stiffness boot front area	medium
Type	mid cut
Closure	standard lacing
Heat molding	no
TOESTOPPER
Name	Chaya Aja
Off Set	yes
Toe stopper fixation	screwed in
Stem	no stem
Shape	flat
Material	NR/SBR = natural rubber / styrene-butadiene rubber

This one of a kind, super soft hoodie is great for an outdoor skate or just letting everyone know how much you love skating.

• 6.5 oz (210 gm) pre-laundered cotton/polyester blend fleece
• ring spun cotton
• 80% Cotton/20% Polyester with 100% cotton 40 singles face yarn for supreme softness

Fritzy's Fit Tip: These are pretty baggy no matter what size you wear. Fritzy wears a women's large shirt normally and wears a medium in this crop hoodie.